Misting Fan Products

Big Fogg designs, builds and installs professional high-pressure misting/fogging delivery systems. We utilize a variety of methodologies to deliver this mist including stainless steel, nylon line and copper. Our high-pressure pump operates at 1000 psi and pushes water and any other product through small orifices that turn the mist into fog and allow for flash evaporation. This way we avoid wetness.

We can set up these systems throughout the plant using sensors and timers for automated mist distribution. We have extensive experience at keeping humidity levels at prescribed levels: misting on and off at specific times.

Big Fogg uses chemical injectors in our delivery systems and distributes spray at specific nozzle locations. We apply diluted product per manufactures specifications.

Big Fogg installs overhead systems throughout the country. We can also provide Misting Fans that can be used as portable units to disinfect specific areas. The choice of disinfection product is up to the customer.  Big Fogg works closely with suppliers that have an FDA approved product.

Big Fogg Products for Disinfectant Misting
High-Pressure Stainless-Steel Misting Systems

Deliver the chemical substance at 1000 psi. from the pump through the nozzles. The high-pressure misting line consists of 316 stainless steel, with stainless steel fitting and unions. The nozzles can have an orifice size between .008 and .020 depending on the application and are stainless steel with anti-drip bodies. These Misting Systems can be installed over head in factory-like environment and be completely automated by for times or specific conditions.

High-Pressure Nylon or Copper Misting

Systems operate the same as the high-pressure stainless-steel misting systems except the delivery product is either nylon or copper. They also operate at 1000 psi creating atomization as high-pressure substance/water is pushed through orifices to create a flash evaporation. These Misting Systems can be installed over the head from in a factory-like environment and be completely automated by zones to turn on at specific times or at specific conditions.

Big Fogg High Pressure Misting Fans

High Pressure misting fans can be hooked directly up to a water/substance supply system that pushes the substance though the stainless steel nozzles. These misting the operate at 1000 psi and push the product through nozzle orifices to create a flash evaporation. These Misting Fans can either be portable like you see on the sideline of a football game or they can be Wall Mounted or overhead misting fans.

Inflatable Misting Tunnels

Inflatable Misting Tunnels have misting nozzles strategically placed throughout their interior, applying product with the goal everyone that walks through them. These inflatables are connected to a high-pressure pump operating at 1000 psi and can be hooked to an injector that feeds the high-pressure pump.

Misting Stations

Misting Stations can be placed at any entrance to any activity. They have spray nozzles placed inside them and turn on and off by sensors. These misting stations are connected to a high-pressure pump operating at 1000 psi and can have an injector if necessary.

Big Fogg High-Pressure Pumps

Big Fogg High-Pressure Pumps have direct-drive misting pumps. These pumps provide high-output mist for continuous operations at a variety of applications including an event, restaurant or odor and dust control. Big Fogg also has quiet pulley belt units work better in more confined spaces with less tolerance for noise.

These high-pressure pump units have UL recognized components, including a safety switch for automatic power-down when water supply is low. Both unit types also have thermal and short circuit protection to prevent electrical overload.

Big Fogg high pressure pumps come in a variety of electrical configurations from the 115v single phase to 460v three phases with a relay and dual filter, prolonging the unit life. Generally used to separate mist zones, these pumps can slow down or speed up depending on the mist demand. These VFD (Variable Frequency Drive) pumps can be built with electric valves that enable them to be operated remotely. Depending on the application and location, high-pressure ball valves can also be used for creating manual zones.



Cool Caddie™
For Dispersing Sanitizers & Disinfectants

Sanitizing/Disinfecting building entrances, rooms, equipment, food, clothing, etc.

Cool Caddie Misting Fan



Disinfectant Misting Booth

Since 2000, Big Fogg™ has designed, built, and installed commercial, industrial, and residential misting systems. Headquartered in Murrieta, California, we have satellite facilities in Jacksonville, Florida, and Austin, Texas. Our expansive headquarters provide state of the art equipment and engineering services to ensure each project meets our stringent quality control requirements and exceed our customer’s expectations.

For decades, we have successfully completed hundreds of installations in restaurants, resorts, wineries, manufacturing facilities, at major sporting events, festivals as well as in residential applications. Recently we expanded our applications to include disinfectant misting systems. Partnering with Blucities Environmental, we are placing the Food and Drug Administration (FDA) approved solution into a permanent high-pressure misting system.

In addition, Big Fogg has sold, designed, made, and installed multiple industrial high-pressure misting systems into various industrial and manufacturing facilities. Many of these misting systems are totally automated with controls to turn and on the misting for different durations of time in separate zones throughout the facility.


Big Fogg has been awarded both the Temecula, CA and Murrieta, CA Chamber of Commerce Business of the Year Awards.